How to Fix a Computer That Turns on but Displays Nothing – A Comprehensive Guide;- Computer problems are often fixable with the power of a few simple solutions. Even the most stubborn of computer problems can be solved with the right software and knowledge.
In this article, we’ll take you through how to fix a computer that turns on but doesn’t display anything. This is a common problem with laptops, as well as other electronics that run on battery power. If you have a desktop or laptop, it’s probably a common problem as well.
Fix a Computer That Turns on but Displays Nothing
However, if you own a smart phone, tablet, or any other kind of device that runs on a battery, your issue is a little more challenging to solve. Thankfully, there are a few things you can do to get your device working properly again.
What is the Problem?
Computer problems can come in many forms, and sometimes the cause is as easy as not connecting a device to the computer properly. Sometimes, however, the computer will just turn on by itself after a power failure, or it may not begin at all because of a faulty hardware device.
This usually happens when the computer is not being used and is stored in a warm, dark place. If you have a habit of leaving computers on all the time, you’re likely to experience this problem.
Fix a Computer That Turns on but Displays Nothing
Computer problems often happen during sleep or while the computer is being used. If you notice your computer turning on by itself while you’re asleep or while you’re engaged in an old-fashioned computer task like emailing or word processing, take a moment to examine your sleeping or working habits. If you’ve got a theory as to what’s causing it, try to correct the problem by changing your sleeping and working habits.
Try These Common Computer Problems first
When your computer won’t turn on, the first thing to check is to see if any of the common problems listed below apply to your device. If not, your problem may be a bit more complicated, but it can be fixed with the proper software.
Check the AC Adapter – Since the computer relies on the adapter to power it, poor connections could be the cause of your issue. Make sure the power adapter is connected properly and that there is nothing plugged into it that is not supposed to be there.
Check for Batteries – Did you unplug the battery and start the computer with the battery removed? If not, you may be all set up and have nothing to do but wait.
Check the Memory – Did you clear the computer’s memory by pressing the ‘R’ key and then holding down the ‘F’ key until the contents of the memory slot are removed?
Look for Bad Batteries
Next, check the batteries in your computer and mobile devices. If the batteries are old or depleted, you may need to replace them. It is recommended that you charge your computer batteries at least once every month, but you should always replace the batteries when they are low.
Make sure to keep track of the dates on your battery compartment doors. If the doors date back to before your device was current model, you may need to purchase a new battery.
Check Your Power Supply
Many computer problems are caused by a faulty power supply, which can be either a hardware or a software issue. The power supply is responsible for ensuring that the electricity coming into your computer is safe and sufficient for the task at hand.
If the power supply is faulty, you may be able to remedy the computer problem by replacing the parts that fail.
To check the power supply, connect your computer to a power source and see if it turns on. If not, the problem may be with your computer or the power supply and you can return it to the store where you purchased it for a replacement.
Don’t Touch the Screen!
We know this one can be a bummer, especially if you have small children who like to “try things” by disconnecting the power supply or having an electric shock from zooming through the corona of a lightning storm. However, this is one way to actually hurt your computer. Letting your hands get anywhere near your computer monitor or keyboard can cause catastrophic damage.
This rule of thumb applies to laptops, smartphones, and tablets, as well as older computers. If you think your device has been involved in an accident, examine the device carefully to make sure the damage wasn’t caused by you.
Make sure the Device is Set Up Right
Once you have a handle on what is causing your computer to turn on but not display anything, the next step is to make sure the device is set up properly.
If the problem is a faulty device or a faulty computer, the issue may be with the device or the computer. In this case, you’ll want to check the device’s set up.
A faulty device will most likely turn on without fail, but a faulty computer may not function at all due to a faulty hardware device. To check the device’s set up, remove the device from the device and connect it to a computer. If the computer recognizes the device, you may be able to correct the device’s problem.
Conclusion
Computer problems are often fixable with the power of a few simple solutions. Even the most stubborn of computer problems can be solved with the right software and knowledge. In this article, we’ve discussed how to fix a computer that turns on but doesn’t display anything.
This is a common problem with laptops, as well as other electronics that run on battery power. If you have a desktop or laptop, it’s probably a common problem as well. However, if you own a smart phone, tablet, or any other kind of device that runs on a battery, your issue is a little more challenging to solve. Thankfully, there are a few things you can do to get your device working properly again.
